3D Birdhouse Kit

This set of polymer clay cutters is available in three sizes. Once assembled they will create a 3, 4, or 5 cm 3D birdhouse. Dimensions are approximate depending on clay thickness and assembly. Your birdhouse house may turn out a little bigger or a little smaller than the posted dimensions. 

Each set comes with all the cutters you'll need to create a little birdhouse: 

• Front
• Back
• Side
• Roof
• Bottom

Picking the right size: The 3 cm size is perfect for earrings. The 4 cm size works well as large earrings or a small potted plant decoration. The 5 cm size is likely too large for earrings but would be perfect for potted plant decor and ornaments! 

Check out this helpful article with step-by-step instructions for assembly. 

These debossing cutters are meant to be used with clay that is approximately 2.5 to 3 mm thick. 

Our polymer clay cutters are printed with resin, meaning the individual lines from the printing process don't show at all so the edges of your clay pieces come out very smooth. Additionally, resin allows us to create a beveled cutting edge on the cutters so that they slice through the clay, pushing the excess clay out and away, rather than just smashing it down onto your cutting surface. You're left with crisp, clean edges often with little to no cleanup or sanding necessary.

Cutter color is not guaranteed. We're always playing around with new resin colors and shimmer effects. We can't promise yours will be the colors seen here, but we can promise that they'll be sharp!

Cutter measurements are approximate, but they will always be within a millimeter or two of the posted measurements. Sizes are based on the height of the assembled birdhouse, not the width.  

Cutters are not guaranteed to be food safe. 

All Cutters are made to order. Processing time is up to 7 days.